Pointcloud Workflows
How to Upload and View Pointclouds
Last Updated: March 17, 2026This guide will walk you through the process of uploading your LiDAR (.las, .laz) files and viewing your LiDAR in FusionMap 1. Open Layers 2. Switch to the “layers” tab 3. Click “Add Layer” 4. Change layer type to “LAS” 5. Upload your LAS File here 6. Input the appropriate EPSG 7. Remember to adjust...
Pointcloud View & Hybrid View Walkthrough
Last Updated: March 17, 2026This guide will walk you through the LiDAR and Hybrid view on Fusionmap 1. The LiDAR View We will be using the LiDAR view for this tutorial, however, the Hybrid view has the same UI as the LiDAR view. The difference is that Hybrid view can view panoramic images instead of point clouds. 2. Click...
How to Download a Section of a Pointcloud From FusionMap
Last Updated: March 17, 2026In this guide, you will learn how to download a point cloud from FusionMap efficiently 1. Click LiDAR view 2. LiDAR View The LiDAR view opens up 3. Select Height Profile Click the height profile button 4. Select Start and End Left click for the start point and right click for the end of the...
Downloading Pointclouds
Last Updated: March 17, 2026This guide will walk you through the steps to Downloading LiDAR using Fusionmap. 1. Open Your LiDAR View 2. Click here 3. Click “Download” 4. Download will begin shortly! This guide covered the steps to Downloading LiDAR in Fusionmap. Powered by guidde
Downloading Panoramic Images
Last Updated: March 17, 2026This guide walks the user through downloading a panoramic image off of FusionMap 1. Select desired panoramic image 2. Open Hybrid View 3. Hybrid View Opens Up 4. Click here 5. Download your panoramic image This guide explained the process of downloading panoramic images in Fusionmap. Powered by guidde
How to Upload a Batch of Pointclouds
Last Updated: March 17, 2026Learn how to efficiently upload a batch of Pointcloud data to your project 1. Click here 2. Click “Add Layer” 3. Change the layer type 4. Change Layer Type to Pointcloud 5. Switch to the batch tab 6. Input a batch name 7. Click the “Select From FusionCloud” button 8. Click “Get SAS” 9. Copy...
